How To Apply

Application Instructions

Our Instant Hot Peel formula delivers soft, durable prints that last. This guide provides proven settings to start—adjust as needed for perfect results every time.

⚠️ Important: We Do Not recommend using a Cricut Easy Press or home iron for DTF transfers.⚠️

Quick Settings:

  • Temperature: 260–285°F (275°F recommended)
  • Pressure: 7 / Firm Pressure
  • Timing: Prepress 5 sec → Press 10 sec → Post-press 5 sec

Step-by-Step Application:

  1. Design will be printed as a mirror image with white ink on the adhesion surface.
  2. Pre-press the garment on the heat press to remove moisture and wrinkles.
  3. Place the transfer on the garment with the image facing up (right-reading).
  4. Press firmly at 275°F for 10 seconds.
  5. Peel starting from the corner with the most ink coverage—use one smooth, continuous motion.
  6. Cover with a finishing sheet (Teflon, parchment paper, or a clean t-shirt) and press for 5 seconds to seal.